Steroids test kit, instruction how to use presence test kit. Simple do yourself test kit.

To keep costs low, we designed the test kit for do-it-yourself use, with all necessary information provided in the instructions. It's a simple color test; all you need to do is compare colors. Instead of using a color chart, the kit includes pictures and videos of actual tests for comparison. It's straightforward; all you need is a bit of patience. Anyone can do it, and it has been successfully used by people worldwide.

You don't need any special skills or to be a chemist because all you have to do is compare one color to another. Please note that all vials contain only 0.1 ml of test reagent. This amount is sufficient, as shown in the pictures and videos. The reagent is corrosive, so for safety reasons, we cannot include more. Use gloves and glasses and be careful when breaking open the glass ampoules.

Before dropping your samples into the test vials, shine UV light on them. The reagent in vial A is fluorescent, emitting a blue glow under UV light. If you see blue fluorescence in vial A, it means you have proper, good 365 nm UV light. The color and intensity of fluorescence will change in vial A if you drop a sample containing hormones. There may be some light reflection in vial B from the glass. No fluorescence in vial B means no hormones are present in the sample.

The steroid test kit is straightforward to use and does not require any special skills. It's a simple pass or fail test based on color similarity. You don't need to be a chemist to determine if the colors match. Anyone can do it without assistance. Simply drop your sample into the test tube and observe the color change under daylight (white light). At this point, the right colors do not necessarily indicate the presence of hormones in the sample; further UV testing is required. Shine a 365 nm UV light on the test vial and observe the fluorescence. No fluorescence indicates a fake product with no hormones. Different steroids will produce different colors (fluorescence) under the 365 nm UV light, allowing you to identify them. Whether your sample is a ground pill, powder, or oil carrier, the test will always produce fluorescence under 365 nm UV light if hormones are present. When a sample emits visible light upon exposure to invisible 365 nm UV light, it's called fluorescence. Although we can't see 365 nm light, we can see wavelengths from about 380 to 740 nanometers. We often receive questions about using 395 nm instead of 365 nm; however, 395 nm is not UV light but blue light, so it's not suitable for this test.

The test kit contains vials A and B, which are used to test various steroids in liquid, pill, or pure powder form. These vials will produce different colors for different steroids. Specialized vials are available for detecting anavar, winstrol, clenbuterol, anadrol, nolvadex, and clomid, as vials A and B cannot detect these substances. If you have raw powder and no access to an expensive laboratory, use the Labmax test kit to detect the presence of steroids, then perform a melting point test. If the result is accurate, your sample is of high purity. Refer to the list to determine which vials to use and which steroids can be tested. It's a simple pass or fail test. Watch the training video and check the list at the bottom of each test page to see how to determine if your sample contains primobolan. For this test, you need vials A and B, as it's one combined test. Some steroids might produce the same color in vial B but a different color in vial A, allowing you to distinguish between them. You only need a small amount of liquid or powder (ground tablet) to drop into each vial. Notice that you should use less of your sample than the amount of test reagent, typically just one to a few drops of liquid or a tiny piece of a ground tablet.

Drop your sample into both vials and observe the color change in vials A and B. Then, shine a 365 nm UV light on vial B; it will produce fluorescence. Under 365 nm UV light, the sample will exhibit different colors, indicating fluorescence. Even if the fluorescence appears slightly darker or brighter, it's still considered a pass, as it could be due to different ratios of various components. The presence of fluorescence indicates the presence of hormones. For example, there are millions of variations of green that we may not be able to distinguish, but if it's green, it indicates the presence of hormones. It doesn't matter which shade of green. No fluorescence means there are no hormones present. We conducted tests using samples with GSO, MCT, and raw powder.

For testing anavar and winstrol there is regular test (the one with yellow test reagent), which does not require UV light. This test is weight sensitive and not suitable for bigger pills and raw powder unless you have precise scale. Anavar, winstrol UV test is more advanced and reliable and there is also anavar purity test. See the links below how to use each test.

Follow the links below, they expalin how to test: The links only explain how to test for presence. Instructions for purity tests are included when you receive your order, it is very simple.

  • Anavar regular test (Ampoules with yellow test reagent)
  • Anavar UV test (Ampoules with transparent test reagent)
  • Anadrol test
  • Boldenone base test
  • Boldenone undecylenate test
  • Clenbuterol test
  • Clomid test
  • Dianabol (Methandienone) test
  • Liquid dianabol test
  • Human growth hormone test
  • Masteron propionate (Drostanolone propionate) test
  • Masteron enanthate (Drostanolone enanthate) test
  • Nandrolone decanoate test
  • Nandrolone phenylpropionate test
  • Nolvadex test
  • Oxymetholone (Anadrol) test
  • Primobolan (Metenolone enanthate) test
  • Proviron test
  • Superdrol (Methasterone) test
  • Sustanon 250 test
  • Testosterone base test
  • Testosterone acetate test
  • Testosterone cypionate test
  • Testosterone enanthate test
  • Testosterone propionate test
  • Trenbolone acetate test
  • Trenbolone enanthate test
  • Turinabol test
  • Liquid turinabol test
  • Winstrol regular test (Ampoules with yellow test reagent)
  • Winstrol advanced UV test (Ampoules with transparent test reagent)
  • 0 Product(s) in cart
    Total USD$ 0.00
     Login Status
    Not logged in